Our Services
Egress Window Replacement in Lincoln, NE
Swap out an old, rusted, or leaky basement window for a code-compliant egress window in the same opening. Most replacements finish in a half day, with free written estimates before we start.
Swap out an old, rusted, or leaky basement window for a code-compliant egress window in the same opening. Most replacements finish in a half day, with free written estimates before we start.
If you're searching for egress window replacement in Lincoln, chances are you've already got a basement window that's seen better days. Steel-frame windows from the 60s, 70s, and 80s rust through, seal shut, and stop meeting current egress code long before the rest of the house wears out. Replacing that window in its existing opening is usually the fastest and most affordable way to fix the problem, and it's one of the most common jobs we do around Lincoln, Waverly, and Hickman.
An egress window replacement means we remove your old basement window and install a new, code-sized unit in the same rough opening, no digging or foundation cutting required if the opening is already large enough. If your current opening is too small for code, that becomes an egress window installation instead, which involves enlarging the opening. Either way, we'll tell you straight which one your house needs before you pay for anything.
When your existing window opening already meets code minimums, we replace the sash and frame without touching the foundation or window well.
Most straight replacements start and finish in a single half-day visit, so your basement isn't opened up for days at a time.
Typical replacement jobs in Lincoln run $1,200 to $3,000 depending on window size, material, and whether the well or grading needs attention too.
We install both vinyl casement and vinyl slider egress windows, and we'll walk you through which style fits your opening and budget.
Every replacement meets current egress code for opening size, sill height, and clear width, which matters for safety and for future home sales.
We're licensed and insured and work throughout Lincoln and Lancaster, Seward, Saline, and Gage counties, with a 24/7 line for closing deadlines.
Old steel-frame basement windows are usually the first thing to fail in a basement remodel. Rust along the frame, a sash that won't fully open, foggy or cracked glass, and drafts you can feel from across the room are all signs the window itself is done, even if the surrounding wall is fine.
Non-compliant size is the other big trigger. If your current window doesn't open wide enough or the opening is too small to meet current egress code, it's worth having it checked, especially if you're planning to finish the basement or sell the house. A quick look at the opening tells us whether a straight replacement will get you to code or whether you need a full enlargement.
Most egress window replacements in Lincoln come down to two styles: vinyl casement and vinyl slider. A casement window swings open on a hinge, usually cranking outward, and gives you the widest clear opening for its size, which is helpful if your window well is narrow. A slider window opens side to side and tends to cost a bit less, but it only opens half its total width at a time.
For most basement bedrooms, we recommend casement windows because they make it easier to hit the minimum clear opening required for egress, especially in a smaller window well. Sliders work well in wider wells where clear opening isn't as tight a squeeze. We'll measure your specific opening and well before recommending one over the other, since the right call depends on your exact numbers, not a general rule.
Egress window replacement in Lincoln typically runs $1,200 to $3,000 per window. The low end covers a standard vinyl slider going into a window well and opening that already meet code, with no extra excavation or drainage work. The high end covers larger casement windows, wells that need to be resized or fitted with a new cover, or older homes where the opening needs minor framing repair.
Because the price range is wide, we give every job a free written estimate after seeing the opening in person. That estimate covers the window unit, labor, and any well or drainage adjustments needed, so there's no guessing once work starts. For a full breakdown of what drives cost up or down, see our egress window cost guide.
A non-compliant basement window is one of the more common items that comes up on a Lincoln home inspection, especially in finished basements used as bedrooms. Buyers' lenders and inspectors check for a proper egress window in any room marketed as a bedroom, and a rusted or undersized window can slow down or derail a sale.
Replacing the window before you list gives you a documented, code-compliant egress point and one less negotiating point for the buyer's inspector to flag. We can turn most replacement jobs around in a half day, which makes it a practical fix to schedule even on a tight closing timeline. If you're under a deadline, call our 24/7 line and we'll get someone out to look at the opening.
Most replacements run $1,200 to $3,000 depending on window size, material, and whether the window well needs adjustment. A standard vinyl slider in an existing compliant opening is usually on the lower end, while a casement window with well work runs higher. We give a free written estimate after measuring your specific opening.
A straight replacement into an existing opening is typically a half-day job, start to finish. If the opening needs to be enlarged or the well needs significant regrading, that becomes a full egress window installation and takes longer, usually one to two days.
Casement windows swing open and give the widest clear opening for their size, which helps meet egress code in narrower window wells. Sliders cost a bit less but only open halfway at a time, so they work best in wider wells. We'll recommend one based on your actual opening measurements.
If the frame is rusted through, painted shut, or the seals have failed, repair usually isn't cost-effective and replacement is the better long-term fix. If the window still opens and seals fine but the opening is undersized for code, you may need a full installation with an enlarged opening instead of a straight replacement.
Yes. Inspectors and buyers' lenders check for a code-compliant egress window in any basement room marketed as a bedroom, and an old or undersized window is a common flag on inspection reports. Replacing it ahead of listing gives you documented code compliance and can help avoid last-minute negotiations before closing.
Free written estimates. Emergency calls answered around the clock.
